NHD-16032AZ-NSW-BBW NEWHAVEN DISPLAY
23
/
23
defective insulation of terminals.
4. The modules should be kept in anti-static bags or other containers resistant to static for storage.
5. Only properly grounded soldering irons should be used.
6. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.
7. The normal static prevention measures should be observed for work clothes and working
benches.
8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
Soldering Precautions:
1. Soldering should be performed only on the I/O terminals.
2. Use soldering irons with proper grounding and no leakage.
3. Soldering temperature: 280C+10C
4. Soldering time: 3 to 4 second.
5. Use eutectic solder with resin flux filling.
6. If flux is used, the LCD surface should be protected to avoid spattering flux.
7. Flux residue should be removed.
Operation Precautions:
1. The viewing angle can be adjusted by varying the LCD driving voltage Vo.
2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the display, the applied
pulse waveform should be a symmetric waveform such that no DC component remains. Be sure to use
the specified operating voltage.
3. Driving voltage should be kept within specified range; excess voltage will shorten display life.
4. Response time increases with decrease in temperature.
5. Display color may be affected at temperatures above its operational range.
6.Keep the temperature within the specified range usage and storage. Excessive temperature and humidity
could cause polarization degradation, polarizer peel-off or generate bubbles.
7. For long-term storage over 40 C is required, the relative humidity should be kept below 60%,and avoid  
direct sunlight.
Limited Warranty
Newhaven Displays and modules are not consumer products, but may be incorporated by Newhaven
Display’s customers into consumer products or components thereof, Newhaven Display does not warrant
that its LCDs and components are fit for any such particular purpose.
1. The liability of Newhaven Display is limited to repair or replacement on the terms set forth
below. Newhaven Display will not be responsible for any subsequent or consequential events or injury
or damage to any personnel or user including third
party personnel and/or user. Unless otherwise
agreed in writing between Newhaven Display and the customer, Newhaven Display will only replace or
repair any of its LCD which is found defective electrically or visually when inspected in accordance
with Newhaven Display general LCD inspection standard . (Copies available on request)
2. No warranty can be granted if any of the precautions state in handling liquid crystal display above
has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as defects that
are caused accelerated environment tests are excluded from warranty.
3. In returning the LCD/LCM, they must be properly packaged; there should be detailed description of
the failures or defect.
相关PDF资料
NHD-16032BZ-FL-YBW LCD MOD GRAPH 160X32 Y/G TRANSFL
NHD-16032BZ-FSW-GBW LCD MOD GRAPH 160X32 WH TRANSFL
NHD-19232WG-BGGH-VT LCD MOD GRAPH 192X32 GRN TRANSFL
NHD-19232WG-BTMI-V#T LCD MOD GRAPH 192X32 WH TRANSM
NHD-2.23-12832UCB3 LCD OLED GRAPHIC 128 X 32 BLUE
NHD-2.23-12832UCY3 LCD OLED GRAPHIC 128 X 32 YLW
NHD-2.4-240320SF-CTXI#-1 LCD DISP TFT 2.4" 240X320 B/L
NHD-2.4-240320SF-CTXI#-F1 LCD TFT 2.4" 240X320 40PIN ZIF
相关代理商/技术参数
NHD-16032BZ-FL-YBW 功能描述:LCD 图形显示模块和配件 STN-Y/G Transfl 122.0 x 44.0 RoHS:否 制造商:ELECTRONIC ASSEMBLY 产品: 分辨率:128 x 64 流体类型:FSTN Positive 接口: 背光: 背景色:White 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-16032BZ-FSW-GBW 功能描述:LCD 图形显示模块和配件 STN-Gray Transfl 122.0 x 44.0 RoHS:否 制造商:ELECTRONIC ASSEMBLY 产品: 分辨率:128 x 64 流体类型:FSTN Positive 接口: 背光: 背景色:White 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-16080AZ 制造商:未知厂家 制造商全称:未知厂家 功能描述:SPECIFICATION OF LCD MODULE
NHD-18-128160ZF-CTXL 制造商:NEWHAVEN 制造商全称:NEWHAVEN 功能描述:TFT (Thin-Film Transistor) Liquid Crystal Display Module
NHD-19232EB-NSW-DTW-AXRev1 制造商:Newhaven Display International 功能描述:160x32 Pixels, STN-GRAY, WHITE LED backlight, Transflective, 6:00, Wide Temp (-20 to +70c), SERIAL or PARALLEL Interface, RoHS
NHD-19232WG-BGGH-V#T 功能描述:LCD 图形显示模块和配件 STN-Gray Transfl 116.0 x 37.0 RoHS:否 制造商:ELECTRONIC ASSEMBLY 产品: 分辨率:128 x 64 流体类型:FSTN Positive 接口: 背光: 背景色:White 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-19232WG-BGGH-VT 功能描述:LCD 图形显示模块和配件 192 x 32 STN-GRAY 116.0 x 37.0 RoHS:否 制造商:ELECTRONIC ASSEMBLY 产品: 分辨率:128 x 64 流体类型:FSTN Positive 接口: 背光: 背景色:White 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-19232WG-BTMI-V#T 功能描述:LCD 图形显示模块和配件 192 x 32 STN-BLUE(-) 116.0 x 37.0 RoHS:否 制造商:ELECTRONIC ASSEMBLY 产品: 分辨率:128 x 64 流体类型:FSTN Positive 接口: 背光: 背景色:White 工作温度范围:- 20 C to + 70 C 封装:Bulk